TILLAGE WEAR PARTS MADE EASY!

Disc Blades

Long-Lasting, efficient, high quality Disc blades are available in a full range of styles including concave, coulter, and flat, with various concavities, thicknesses, and sizes up to 42" in diameter.   The Ingersoll standard line of discs includes plain edge discs, notched edge discs and the new SoilRazor™ disc, all in a variety of sizes and styles. You'll also find special metals, like the Rollable Boron discs and special surface treatments like the DuraFace. They are manufactured to the highest standards of quality and sharpness and uniformity featuring the best steel formulations in the business.

The hard-facing process dramatically improves the wear-resistance of blades by increasing the durability of the steel itself, specifically where it contacts the soil. For over a generation, farmers have tested and proven that Ingersoll Dura-Faced discs are tougher, last longer, and provide superior value. Dura-Facing is available on both N and F Series blades and is recommended for use in any application or area where abrasive soil conditions exist.   Rollable Boron disc blade - A genuine benefit to boron alloy steel is its hardness, and our exclusive boron alloy is as hard as any disc steel made in the world.  The only problem with hard steel is that it's almost impossible to roll the edge to a fine sharp edge. Until now, Ingersoll metallurgists have worked tirelessly to develop an alloy with the toughness and durability of boron while maintaining the ability to roll the edge. Enjoy the benefits of boron alloy steel, which is amazingly hard and flexible at the same time, and still refresh the disc edge in a roller.

SMOOTH Disc BLADES

Plain flat center disc blade - has a slight concavity to provide careful control over soil tillage. The plain hard-faced process yields a disc that’s nearly as hard as tungsten carbide but without the brittleness. What’s more, it’s almost as corrosion resistant as stainless steel but without the high cost.  The result is a disc like nothing you’ve ever seen before. It lasts a long time and remains sharp, even when it faces off against the worst soil conditions you can throw at it.   Plain Concave disc blade - does an excellent job of tilling and inverting the soil. The action of the disc depends on the size and depth of the disc, the concavity and the speed.

Size Gauge Hole Size/Pattern Part Number Weight (lbs)
16" 11 1" & 1-1/8" DS 16X111DS 7
16" 11 1-1/2" RD 161112R 7
16" 9 1-1/8" SQ 16X918S 7
18" 9 1" & 1-1/8" DS 18X91DS 10.3
18" 9 1-1/8" & 1-1/4" DS 18X918DS 10.3
18" 9 1-1/8" RD 18X918R 10.3
18" 9 1-1/8" SQ 18X918S 10.3
18" 9 1-1/2" RD 18X912R 10.3
18" 9 1-1/2" SQ 18X912S 10.3
18" 8 1" & 1-1/8" DS 18X81DS 11.7
18" 8 1-1/8" & 1-1/4" DS 18X818DS 11.7
18" 8 1-1/8" RD 18X818R 11.7
18" 8 1-1/2" RD 18X812R 11.7
18" 8 1-1/2" SQ 18X812S 11.7
18" 8 1-1/2" SQ & 1-1/4" RD 18X812SR 11.7
18" 7 1-1/8" SQ 18X718S 12
18" 7 1-1/2" RD 18X712R 12
18" 3/16" 1-1/8" SQ 18X31618S 12
20" 7 1" & 1-1/8" DS 20X71DS 15.6
20" 7 1-1/8" SQ 20X718S 15.6
20" 7 1-1/8" & 1-1/4" DS 20X718DS 15.6
20" 7 1-1/4" & 1-1/2" DS 20X714DS 15.6
20" 7 1-1/2" RD 20X712R 15.6
20" 7 1-1/2" SQ 20X712S 15.6
20" 6 1" & 1-1/8" DS 20X61DS 18
20" 6 1-1/8" & 1-1/4" DS 20X618DS 18
20" 6 1-1/2" RD 20X612R 18
20" 6 1-1/2" SQ 20X612S 18
20" 6 1-1/2" SQ & 1-3/4" RD 20X612SR 18
20" 3/16" 1-1/8" SQ 20X31618S 20
20" 1/4" 1-1/8" SQ 20X1418S 21
20" 1/4" 1-1/8" & 1-1/4" DS 20X1418DS 21
20" 1/4" 1-1/2" SQ & 1-3/4" RD 20X1412SR 21
20" 1/4" DMI 5-Hole 20X14DMI 21
22" 7 1" & 1-1/8" DS 22X71DS 19
22" 7 1-1/8" SQ 22X718S 19
22" 7 1-1/8" & 1-1/4" DS 22X718DS 19
22" 7 1-1/2" RD 22X712R 19
22" 7 1-1/2" SQ 22X712S 19
22" 7 1-1/2" SQ & 1-3/4" RD 22X712SR 19
22" 7 1-3/4" RD 22X734R 19
22" 6 1-1/8" SQ 22X618S 21.8
22" 6 1-1/8" & 1-1/4" DS 22X618DS 21.8
22" 6 1-1/2" RD 22X612R 21.8
22" 6 1-1/2" SQ 22X612S 21.8
22" 6 1-1/2" SQ & 1-3/4" RD 22X612SR 21.8
22" 1/4" 1" & 1-1/8" DS 22X141DS 27.4
22" 1/4" 1-1/8" SQ 22X1418S 27.4
22" 1/4" 1-1/8" & 1-1/4" DS 22X1418DS 27.4
22" 1/4" 1-1/4" SQ & 1-1/2" RD 22X1414SR 27.4
22" 1/4" 1-1/2" SQ 22X1412S 27.4
22" 1/4" 1-1/2" SQ & 1-3/4" RD 22X1412SR 27.4
22" 1/4" 1-3/4" RD 22X1434R 27.4
22" 1/4" DMI 5-Hole 22X1414DMI 27.4
24" 1/4" 1-1/4" & 1-1/2" DS 24X1414DS 31.4
24" 1/4" 1-1/4" SQ & 1-1/2" RD 24X1414SR 31.4
24" 1/4" 1-1/2" SQ 24X1412S 31.4
24" 1/4" 1-1/2" SQ & 1-3/4" RD 24X1412SR 31.4
24" 1/4" 1-3/4" RD 24X1434R 31.4
24" 1/4" 2" RD 24X142R 31.4
26" 1/4" 1-1/2" SQ 26X1412S 37
26" 1/4" 1-1/2" SQ & 1-3/4" RD 26X1412SR 37
26" 1/4" 1-5/8" SQ 26X14158S 37

NOTCHED Disc BLADES

Notched Flat Center disc blade – provides a very aggressive cutting edge that is well-suited for soil penetration (especially when the concavity of the disc is shallow). These discs are also a good choice for residue management.

Size Gauge Hole Size/ Pattern Part Number Weight (lbs)
16" 9 1-1/8" SQ 16X9N18S 11
18" 9 1-1/8" SQ 18X9N18S 13
18" 9 1-1/8" & 1-1/4" DS 18X9N18DS 13
18" 7 7/8" SQ & 1" RD 18X7N78SR 12
18" 7 1-1/8" SQ 18X7N18S 12
18" 3/16" 1-1/8" SQ 18X316N18S 11.7
18" 1/4" 1-1/8" SQ 18X14N18S 11.7
20" 9 1-1/8" SQ 20X9N18S 18
20" 7 1-1/8" & 1-1/4" DS 20X7N18DS 15.6
20" 3/16" 1" & 1-1/8" DS 20X316N1DS 18
20" 3/16" 1-1/8" SQ 20X316N18S 18
20" 1/4" 1-1/8" SQ 20X14N18S 18.5
22" 7 1-1/8" SQ 22X7N18S 17.5
22" 7 1-1/8" & 1-1/4" DS 22X7N18DS 17.5
22" 7 1-1/2" SQ 22X7N12S 17.5
22" 1/4" 1-1/8" & 1-1/4" DS 22X14N18DS 24.8
22" 1/4" 1-1/4" SQ & 1-1/2" RD 22X14N14SR 24.8
22" 1/4" 1-1/2" SQ 22X14N12S 24.8
22" 1/4" 1-1/2" SQ & 1-3/4" RD 22X14N12SR 24.8
24" 1/4" 1-1/8" & 1-1/4" DS 24X14N18DS 24.8
24" 1/4" 1-1/2" RD 24X14N12R 24.8
24" 1/4" 1-1/2" SQ 24X14N12S 24.8
24" 1/4" 1-1/2" SQ & 1-3/4" RD 24X14N12SR 24.8
24" 1/4" 1-3/4" RD 24X14N34R 24.8
26" 1/4" 1-1/2" SQ 26X14N12S 29.4
26" 1/4" 1-3/4" RD 26X1413AR 29.4

RAISED CRIMP CENTER Disc BLADES Case / IH

Smooth Raised Crimp Center Disc Blades
Size Gauge Hole Size/Pattern Part Number Weight (lbs)
18" 8 1-1/8" SQ 18X8FC18S 11.7
18" 7 1-1/8" SQ 18X7FC18S 11.7
20" 9 1-1/8" SQ 20X9FC18S 15.6
20" 7 1-1/8" SQ 20X7FC18S 15.6
20" 6 1-1/8" SQ 20X6FC18S 15.6
20" 1/4" 1-1/2" SQ 20X14FC12S 15.6
22" 7 1-1/8" SQ 22X7FC18S 19
22" 1/4" 1-1/8" SQ 22X14FC18S 19
24" 6 1-1/8" SQ 24X6FC18S 22
24" 1/4" 1-1/2" SQ 24X14FC12S 22
26" 1/4" 1-1/2" SQ 26X14FC12S 38.2
Notched Raised Crimp Center Disc Blades
Size Gauge Hole Size/Pattern Part Number Weight (lbs)
18" 8 1-1/8" SQ 18X8FCN18S 11.7
20" 3/16" 1-1/8" SQ 20X316FCN18S 11.7

DEEP CONE Disc BLADES / DEERE

Smooth Deep Cone Disc Blades
Size Gauge Hole Size/ Pattern Part Number Weight (lbs)
20" 7 1-1/8" & 1-1/4" DS 20X7C18DS 17
22" 6 1-1/8" & 1-1/4" DS 22X6C18DS 24.7
22" 1/4" 1-1/8" & 1-1/4" DS 22X14C18DS 24.7
22" 1/4" 1-1/4" SQ 22X14C14S 24.7
22" 1/4" 1-1/2" SQ 22X14C12S 24.7
24" 1/4" 1-1/8" & 1-1/4" DS 22X14C18DS 32.6
24" 1/4" 1-1/4" SQ 24X14C14S 32.6
         
Notched Deep Cone Disc Blades
Size Gauge Hole Size/ Pattern Part Number Weight (lbs)
22" 1/4" 1-1/4" SQ 22X14CN14S 24.7
24" 1/4" 1-1/4" SQ 24X14CN14S 32.6

ROME Disc BLADES

Part Number Description
20 Inch Rome Disc Blades  
3008518 20" x 1/4" (.236); 2" concavity; smooth; 1-5/8" Rd. Axle
3008642 20" X 1/4" (.236); 2" concavity; cutout; 1-5/8" Rd. Axle
3008639 20" x 1/4" (.236); 2" concavity; 3-notch; 1-5/8" Rd. Axle
3000207B 20" x 3/16" (.177); Cutout; 2-1/2" concavity; 1-5/8" Rd. Axle
22 Inch Rome Disc Blades  
3001004B 22" x 3/16" (.177); 3.19" concavity; Cutout; 1-5/8" Rd. Axle
3008644 22" x 1/4" (.236); 2-1/2" concavity; Cutout; 1-5/8" Rd.Axle
3008640 22" x 1/4" (.236); 2-1/2" concavity; 3-notch; 1-5/8" Rd. Axle
3008643 22" x 1/4" (.236); 2-1/2" concavity; Smooth; 1-5/8" Rd. Axle
24 Inch Rome Disc Blades  
3008648 24" x 1/4" (.236); 2.62" concavity; cutout; 1-5/8" Rd. Axle
3008647 24" x 1/4" (.236); 2.62" concavity; smooth; 1-5/8" Rd.Axle
3008646 24" x 3/16" (.177); 3" concavity; cutout; 1-5/8" Rd. Axle
3000208B 24" x 1/4" (.236); 3.25" concavity; cutout; 1-5/8" Rd. Axle
3000472B 24" x 3/16" (.177); 3.38" concavity; cutout; 1-5/8" Rd. Axle
26 Inch Rome Disc Blades  
3000209B 26" x 1/4"(.236); 4" concavity; cutout; 1-5/8" Rd. Axle
3000210B 26" x 5/16" (.315); 4" concavity; cutout; 1-5/8" Rd. Axle
3046058 26" x 5/16" (.315); 2.5" Concavity; cutout; 1-5/8" Rd. Axle
3046075 26" x 5/16" (.315); 2.5" Concavity; Smooth; 1-5/8" Rd. Axle
3008649 26" x 1/4"(.236); 3.5" concavity; smooth; 1-5/8" Rd. Axle
3008652 26" x 5/16" (.315); 3.5" concavity; cutout; 1-5/8" Rd. Axle
28 Inch Rome Disc Blades  
3000214B 28" x 5/16" (.315); 3.98" Concavity; Cutout; !-5/8" Rd. Axle
3001337 28" x 5/16" (.315); 3.98" Concavity; Cutout; !-5/8" Rd. Axle; Hardfaced
3046057 28" x 5/16" (.315); 2-7/8" Concavity; Cutout; 1-5/8" Rd. Axle
3029021 28" x 5/16" (.315); 2.76" Concavity; cutout; 1-5/8" Rd. Axle; Hardfaced
3000212B 28" x 5/16" (.315); 3.98" Concavity; cutout; Dimpled; 2-1/8" Rd. Axle
3000213B 28" x 3/8" (.375); 4.1/2" concavity; cutout; Dimpled; 2-1/8" Rd. Axle
3000217B 28" x 3/8" (10mm); 4.33" concavity;cutout; Dimpled; 2-1/2" Rd. Axle
3046011 28" X 5/16" (.315); 2-7/8" Concavity; Smooth; 1-5/8" Rd. Axle
3029022 28" x 5/16" (.315); 2.76" Concavity; Smooth; 1-5/8" Rd. Axle; Hardfaced
30 Inch Rome Disc Blades  
3000218B 30" X 3/8" (.315); 4.75" concavity; cutout; Dimpled; 2-1/8" Axle
3000220B 30" x 1/2" (.50); 4.84" concavity; cutout; Dimpled; 2-1/2" Axle
CC30L12 30" x 1/2" (.50); 4.84" concavity; cutout; Dimpled; 2-1/8" Axle
32 Inch Rome Disc Blades  
3000222B 32" x 3/8" (.375); 5.25" concavity; cutout; Dimpled; 2-1/8" Axle
3001335 32" x 3/8" (.375); 4.75" concavity; cutout; Dimpled; 2-1/8" Axle; Hardfaced
3000360B 32" x 3/8" (.375); 3.5" concavity; cutout; Dimpled; 2-1/8" Axle
3000359 32" x 3/8" (10mm); 3.5" concavity; cutout; Dimpled; 2-1/8" Axle; Hardfaced
3000223B 32" x 1/2" (12mm); 5.28" concavity; cutout; Dimpled; 2-1/2" Axle
34 Inch Rome Disc Blades  
CC34L10S (3047044) 34" x 3/8" (10mm); 3.89" (99mm) concavity; cutout; Dimpled; 2-1/8" Rd. Axle
36 Inch Rome Disc Blades  
3000225B 36" x 1/2" (12mm); 5-1/8" concavity; cutout; Dimpled; 2-1/2" Rd. Axle
CC36N12 (3000226) 36" x 1/2" (12mm); 5-1/2" concavity; cutout; Dimpled; 3-1/4" Rd. Axle

BAKER PLOW BLADES

               
Part Number Diameter Edge Style Thickness/MM Guage Axle Size Concavity Weight
03-B2414-5 24" Smooth 6 1/4" 5 Hole Baker 3-1/2" 25 lbs.
03-B28516-5 28" Smooth 8 5/16" 5 Hole Baker 4" 50 lbs.
03-B30516-5 30" Smooth 8 5/16" 5 Hole Baker 5" 64 lbs.
03-B32516-5 32" Smooth 8 5/16" 5 Hole Baker 4-3/4" 78 lbs.
332-P3612600 36" Smooth 12 1/2" 5 Hole Baker 6"

SPECIAL CONCAVITY Disc BLADES - Sharp and strong, all day long.

 Concave disc blade - used to pulverize and smooth the soil. Large diameter discs, sometimes called plowing discs, cut deep into the soil and turn it as they go. They're used where extensive soil disturbance is desired and the farmer's goal is to bury the residue from the last crop.

SoilRazor™: The patented SoilRazor technology from Ingersoll is the most exciting new product to come along in years. The unique saw tooth design allows this blade to capture and size the toughest GMO residue. What’s more, as the cutting edge wears away it maintains its cutting ability. This is made possibly because of the unique flute design. As the blade begins to wear the flutes actually shift, the hills become the valleys and the valleys become the hills.  SoilRazor CT disc blade - has excellent clod-crushing capabilities at normal working speeds and yields superior performance in soft soils.  The unique saw-tooth design is extremely well-suited for cutting through the toughest of residue and penetrating deep into the soil.  What's more, as the cutting edge wears away, it actually becomes more aggressive. So you can continue to work with it for season after season, even in the toughest of conditions. So if you're looking for long service life in an aggressive disc, be sure to take a closer look at the SoilRazor from Ingersoll.

Miller Disc Blades
Size Material Concave Part Number Weight (lbs)
24" 1/4" 2-5/8" for front rank 24X1434RMF 29.4
24" 1/4" 3-3/4" for rear rank 24X1434RMR 29.4
26" 5/16" 3" for front rank 26X5163RMF 46
26" 5/16" 4" for rear rank 26X5163RMR 46
Sunflower Disc Blades
Size Material Concave Part Number Weight (lbs)
24.51" 0.256" 2.42" 602-N7588 32
24" 0.256" 3" 602-N1964 32

BEARINGS

       
Greasable Bearings    
Bore Size/Shape Applications Part Number Weight (lbs)
1-1/8" SQ Amco, Case, Deere, Oliver GW208PPB-8 1.65
1-1/8" SQ Kewanee, Krause GW210PPB-8 1.65
1-1/4" RD Case, IH, Midland GW209PPB-8 1.65
1.535" RD CrustBuster, DMI, Krause, Sunflower GW209PPB-4 1.65
1.785 RD Case, Krause GW210PPB-8 1.65
2-13/16" RD BushHog, Lilliston GW211PP-2 1.65
2-13/16" RD Case, Wilrich GW211PPB-2 1.65
Sealed Bearings
Bore Size/Shape Applications Part Number Weight (lbs)
1-1/8" SQ BushHog, Case, Deere, Krause W208PP-5 1.65
1-1/8" SQ Amco, Deere, IH, White W208PPB-5 1.65
1-1/8" SQ BushHog, Lillistion W208PPB-12 1.65
1-3/16" RD Krause, Oliver W208PPB-7 1.65
1-1/4" SQ Deere, MF W209PPB-5 1.65
1-1/2" SQ Case W211PPB-3 1.65
1.535 RD FarmHand, Krause W209PPB-4 1.65
1.7717 RD BushHog, Case, MF, Schaeffer, White W209PPB-2 1.65
1-15/16" RD BushHog, Krause W211PPB-2 1.65
2-3/16" RD BushHog, Case, MF, Schaeffer, White W210PPB-2 1.65

GANG AXLES

868-2052 1"SQ X 26.5" DISC HARROW AXLE
868-2053 1"SQ X 34" DISC HARROW AXLE
868-2054 1" SQ X 41" DISC HARROW AXLE
868-2055 1"SQ X 30.63" DISC HARROW AXLE
868-2056 1"SQ X 39.63" DISC HARROW AXLE
868-AX118131 1-1/8"SQX130.4" DISC AXLE(REPL 121459C1)
868-AX1181535 1-1/8"X153.5" DISC AXLE
868-AX118183 1-1/8"SQ X 183" DISC AXLE
868-AX11828 1-1/8" SQ X 28" DISC AXLE
868-AX11831 1-1/8"X31" DISC AXLE2" THREAD LTH
868-AX118485 1-1/8SQ X 48.5 DISC AXLE2.75T
868-AX118495 1-1/8"SQX49.5" DISC AXLE2.75 CT
868-AX118585 1-1/8SQ X 58.5" DISC AXLE
868-AX78335 DISC AXLE 7/8" X 33-1/2"
868-AXR1127775 1-1/2RD X 77.75" DISC AXLEREPL JD AP2779
868-AXR11285 1-1/2RD X 85" DISC AXLEREPL JD AP29783
868-SMA20133 1-1/8 SQ X 50.7" JD DISC AXLE
868-SMA20134 1-1/8 SQ X 59.7" JD DISC AXLE
868-SMA20615 1-1/8 SQ X 68.7" JD DISC AXLE
868-SMA20616 1-1/8 SQ X 77.7" JD DISC AXLE
868-SMA20617 1-1/8 SQ X 87" JD DISC AXLE
868-SMA40826 1-1/8 SQ X 95.7" JD DISC AXLE
868-SMA40827 1-1/8 SQ X 104.7" JD DISC AXLE
868-SMA468582 1-1/8 SQ X 76.4" IH DISC AXLE
868-SMA468583 1-1/8 SQ X 79.4" IH DISC AXLE
868-SMA468607 1-1/8 SQ X 39.8" IH DISC AXLE
868-SMA471014 1-1/8" SQ X 49.5" DISC AXLE
868-SMA471015 1-1/8 SQ X 57.6" IH DISC AXLE
1-1/8" Disc Axle - Case Disc
868-SMA472586 1-1/8 SQ X 71.9" IH DISC AXLE
   
1-1/8" Disc Axle - Case Disc
868-SMA481844 1-1/8 SQ X 85.5" IH DISC AXLE
   
1-1/8" Disc Axle - Case Disc
868-SMA487168 1-1/8 SQ X 94.6" IH DISC AXLE
868-SMA546831 1-1/8" SQ X 112.5" IH GANG AXLE
868-SMA549978 DISC AXLE-CASE/IH 1-1/2SQ X 57.9
868-SMA549979 DISC AXLE-CASE/IH 1-1/2SQ X 68.2
868-SMA549980 DISC AXLE-CASE/IH 1-1/2SQX 78.9
868-SMA549981 DISC AXLE-CASE/IH 1-1/2SQ X 89.4
868-SMA57000 1-1/8"SQ X 121.5" AXLE
868-SMA58831 DISC AXLE-CASE/IH 1-1/2SQ X 47.3"
868-SMA588329 1-1/8" SQ X 103.4" IH GANG AXLE
868-SMA652939 1-1/8 SQ X 67.4" IH DISC AXLE
868-SMA8327 1-1/2SQX49.5 DISC AXLE

Rotary Cutter Blade

PART # DESCRIPTION O.A.L. WIDTH THICKNESS HOLE SIZE WT(LB)
ALAMO
Models: A-Boom, Boom Axe, Machete, Versa
404-02726900 Dual Edge 14-1/2" 5" 5/8" 1-1/2" 12
BUSH HOG
Models: 6, 12, 105, 205, 266, 305, 502, 600, Squeeler 60, RB60
404-36 CCW 24-3/4" 3" 1/2" 1-1/2" 10
Models: 6, 12, 105, 205, 255, 266, 305, 502, 504, 600, RB60, SQ60, SQ600-3, SQ60-5, 5ft.
404-62 CCW 24-3/4" 3-1/2" 1/2" 1-1/2" 11.8
Models: 206, 256,306, 307, 1206, 1256, SQ720, SQ720-3, SQ72-4, 56ft.
404-463 CCW 27-3/4" 3-1/2" 1/2" 1-1/2" 12
Models: 207, 257, 307, 1207, 1257, 1307,7ft.
404-464 CCW 30-3/4" 3-1/2" 1/2" 1-1/2" 13
Models:  3165, 1312R,2710,2715; 2 used on 3126, 3126R, 3126S, 3210, 13126R, 13126S; Replaces 90014
404-78495 CW 24" 4" 1/2" 1-1/2" 13.6
Models:  2710, 2715, 4 used on 3126-0; 2 used on 3126, 3126R & Offset, 3126S & Offset, 3210, 13126R, 
13126S; Replaces 90015
404-78495 Updraft, CCW 24" 4" 1/2" 1-1/2" 13.6
Models:  2 used on 109LH, 160 RH & Center, 166 RH & Center, 1109 LH, 1166 RH & Center, 1209 LH, 
1600 RH & Center, 4 used 109 Offset, 1109 Offset; 12512, 13108 & Offset, 2512, 3108 & Offset, 
3209 & Offset
404-7828 CCW 19-1/4" 4" 1/2" 1-1/2" 11.5
Models:  2 used on 109LH, 160LH, 166LH, 1109RH, 1166LH, 1209 RH, 1600 LH; 2512, 3108, 3209, 12512, 13108
404-7829 CW 19-1/4" 4" 1/2" 1-1/2" 11.5
Models:  2 used on 6 Uplift, 12 Uplift, 105 Uplift, 126LH, 205 Uplift, 266 Uplift, 305 Uplift, 310RH, 315RH,
502 Uplift, 600 Uplift, 1126LH, 1226LH, 1310RH, 1315RH, 2315RH, 2415RH, 2615RH, 32615RH; 
4 used 126 Offset, 1126 Offset; 206, 275, 285, 615RH, 2510, 2610 RH, 12610RH, 12615, RB60, SQ60, SQ600-3,
SQ60-5
404-7555 CCW 24-3/4" 4" 1/2" 1-1/2" 13.9
Models:  2 used on 206 Uplift, 306 Uplift, 310 Center, 315 Center, 1310 Center, 1315 Center, 2315 Center,
2415 Center, 2615 Center, 3615 Center, 256, 276, 286, 1206, 1256, 2610 Center, 2720, 3610 Center,
12610 Center, 12615 Center, 12720, SQ720, SQ720-3, SQ72-4
404-7556 CCW 27-3/4" 4" 1/2" 1-1/2" 15.7
Models: 2 used on 207, 220 LH, 257, 307, 307R 2620 LH 7 other 7 ft. units.  4 used on 220, 2620; 227, 287,
1207, 1220 RH & Center, 1257, 1287, 1307, 2620 RH & Center, SQ7, SQ840
404-7557 CCW 30-3/4" 4" 1/2" 1-1/2" 17
404-7557 CW for LH220,2620 30-3/4" 4" 1/2" 1-1/2" 17
Models:  SM60, SM160
404-63968 Dual Edge 24-1/2" 3" 1/2" 1-1/2" 9.8
Models:  2 used on 126RH, 315LH, 1126RH, 1226RH, 1315LH, 2615LH, 3615LH, 2315LH, 2415LH, 2510, 2610LH,
3610LH, 12610LH, 12615LH
404-11150 CW 24-3/4" 4" 1/2" 1-1/2" 13.9
Models:  2 used on 13368, 3008 (sn 12-09, 999 & below); 4 used on 3368, 3368S; 3214
404-86664 CCW 20-3/4" 4" 1/2" 1-1/2" 12
Models:  2 used on 3008 (sn 12-09, 999 & below), 3368, 3368S; 4 used on 13368; 3214, 113368
404-86665 CW 20-3/4" 4" 1/2" 1-1/2" 12
Models:  3368, 3368S, 13368, shredder blade used 86665 & 86665
404-86666 Dual Edge 20" 4" 1/2" 1-1/2" 11.5
BUSHWACKER
Models:  T-180 4 used
404-B3093 CCW, offset 27" 4" 1/2" 1-3/8"
Models:  T-180 2 used uplift
404-B3094 CW, offset 27" 4" 1/2" 1-38"
CORSICANA GRADER
Models:  C & D
404-301P CCW 25" 3" 3/8" 1-1/2" 9
Models:  G & F
404-301D CCW 25" 3" 1/2" 1-1/2" 12
JOHN DEERE
Models:  2 used on 509, 609, 709, 727, 737, 1008, 1018; 4 used 1508, 1517, 1518, 2018; 4 used on Cutters,
8 used on Shredders; Replaces W-13607, 34289, 39200, 43040, 43466, 93179
404-39200 CCW 21-3/4" 4" 1/2" 1-1/2" 12
Models:  2 used on 727, 737, 1008, 1018, 1508, 1517, 1518, 2018; 2 used on Cutters, 4 used on Shredders;
Replaces W-13606, 34290, 39201, 43465, 93178
404-39201 CW 21-3/4" 4" 1/2" 1-1/2" 12
Models:  2 used on 1008; 4 used 1408, 1418; Repl. W-28160, 34296, 39202, 43044, 44235
404-39202 CW 18-1/4" 4" 1/2" 1-1/2" 11
Models:  1008, 1408, 1418 (2 used)
404-39203 CCW 18-1/4" 4" 1/2" 1-1/2" 11
Models:  1008 (4 used) - 1408, 1418 (6 used)
404-39204 Dual Edge 18-1/4" 4" 1/2" 1-1/2" 14
Models:  1008 (4 used) - 1408, 1418 Double Blade Shredder (6 used)
404-39213 Dual Edge 18-1/4" 4" 1/2" 1-1/2" 11
Models:  CX15, HX15, MX10 (2 used) - CX20, HX20 (2 used on Cutters, 4 used on Shredder
404-45326 CW 21-3/4" 4" 1/2" 1-1/2" 12
Models:  MX5, MX6, MX10 (2 used) - CX15, HX15 (4 used) - CX20, HX20 (2 used on Cutters, 4 used on Shredder)
404-45327 CCW 21-3/4" 4" 1/2" 1-1/2" 12
FORD
Models:  22 Series, 47, 60, 70, 72, 505, 901, 908, 909, 910
404-220633 CCW 22-1/2" 3-1/2" 3/8" 1-1/2" 7
HARDEE
Models:  772, T484LT, PT, T884LT & PT with Round Blade Holder
404-C461 Single Edge 18-5/8" 3-3/8" 3/8" 1-1/2" 5.5
404-C462 Single Edge 23-1/8" 3-3/8" 3/8" 1-1/2" 6.5
404-C470 Single Edge, CCW 28-3/4" 3-1/2" 1/2" 1-1/2" 13
Models:  660, 760, 960, 1060, H-CO, T-160 & LT & LTO, T166 & LT & LTO, T172 & LT & LTO
404-C49 Single Edge 23" 3" 1/2" 1-1/2" 10
Models:  H-CO, T160 & LT & LTO, T166 & LT & LTO, T172 & LT & LTO All Except 66:, 72" with Round Blade Holder
404-C49ND Dual Edge 23" 3" 1/2" 1-1/2" 10
Models:  C66, H8, PW, T8215 All with Round Blade Holder, T8915, T9215, T9515
404-C50ND Dual Edge, CCW 19" 3" 1/2" 1-1/2" 7
404-C469ND Dual Edge 26" 3-1/2" 1/2" 1-1/2" 12
Models:  T8398, T8714
404-C1256 Uplift, CCW 18-3/4" 3-1/2" 1/2" 1-1/2" 12
404-C1257 Uplift, CW 18-3/4" 3-1/2" 1/2" 1-1/2" 12
HICO (HOWSE)
Models:  5 FT. CUTTER
404-H608 CCW 25" 3-1/2" 1/2" 1-1/2" 10.5
Models:  600, 601S, 602S, M72S, MH6
404-HL422N Uplift, CW 27-1/2" 3-1/2" 1/2" 1-1/2"
HUSTLER (ROANOKE)
Models:  G195A, G195B
404-2231 Dual Edge 18-1/2" 4" 1/2" 1-1/2" 11
IMCO
Models:  1501  5 & 6 FT.
404-1501 CCW 25" 3" 1/2" 1-1/2" 10.5
LAND PRIDE
Models:  5010, 5015, 6010, 6015, RCB6015, RC(M)
404-820168 CCW 29" 4" 1/2" 1-1/2" 15
404-820169 CCW 23" 4" 1/2" 1-1/2" 13
404-820170 CW 23" 4" 1/2" 1-1/2" 13
LILLISTON
Models:  6 used on 760 Finishing Mower Chopper
404-L0015011 CCW 14-1/8" 3" 3/8" S 3/4" - I/S 1/2" 4.3
MODERN
Models:  2 used on Sunshine 6 FT., Commando 6 & 7 ft.
404-M4010175 CCW 28" 4-1/2" 1/2" 1-1/2" 15.3
MOWHAWK
Models:  507
404-1210 Dual Edge 15" 3" 1/2" 1-1/4" 5.5
Models:  840, 1360
404-1214 Dual Edge 17" 3" 1/2" 1-1/2" 7.3
404-1215 Updraft, Dual Edge 17" 3" 1/2" 1-1/2" 10.8
Models:  720
404-7724 CCW 25" 3" 1/2" 1-1/2" 11
SCHULTE
Models:  5026, 3020, SH1500
404-401016 Dual Edge Shredder B 24-3/4" 4" 1/2" 1-1/2" 13.5
Models: 5026, FX520, SH1000
404-401024 Dual Edge Shredder B 28" 4" 1/2" 1-1/2" 15.5
Models:  5026LH Outer, S100LH, S100RH, S150LH, XH1000LH, XH1000RH, XH1500LH
404-401026 Updraft, CW 24-3/4" 4" 1/2" 1-1/2" 10
Models:  5026RH Outer, S100LH, S100RH, S150RH, XH1000LH, XH1000RH, XH1500RH
404-401027 Updraft, CCW 24-3/4" 4" 1/2" 1-1/2" 10
Models:  5026 Center, 5026RH Inner, V1280RH
404-401028 Updraft, CCW 27-3/4" 4" 1/2" 1-1/2" 10
Models:  5026LH Inner, S100 Cntr, S150 Cntr, V1280LH, XH600, XH1500 Cntr, XL1000 Cntr
404-401032 Updraft, CW 27-3/4" 4-1/2" 1/2" 1-1/2" 10
SERVIS - RHINO
Models:  A972, SE15, TW72, TW144, SR72 S/N<10205
404-8588 Left-Updraft, CCW 26-1/4" 4" 1/2" 1-1/2" 14
Models:  A960, SE15, TW60, SR60 S/N<10145
404-8589 Left-Updraft, CCW 20-1/8" 4" 1/2" 1-1/2" 10.6
Models:  SE15, SR15M S/N<13831, TW120
404-8590 Right-Updraft, CW 20-1/8" 4" 1/2" 1-1/2" 10.6
Models:  Saturn 5 & 6
404-71103 24-3/4" 3" .401" 1" 8.3
Models:  Gyro 84
404-371102B CCW 20" 4" 1/2" 1-3/8" 11
Models:  1008 Cntr, CY72, FL10M Cntr, FL15M Cntr, Flex 15 Cntr, SA15 Cntr, SR15M
404-582013F Center-Updraft CCW 27-1/4" 4" 1/2" 1-3/8" 15
Models:  1008, CY60, Flex 15, SA 15
404-622013F Left-Updraft, CCW 25" 4" 1/2" 1-3/8" 14
404-652011RF Right-Updraft, CW 25" 4" 1/2" 1-3/8" 14
Models:  1310
404-681063 Dual Edge 19" 4" 1/2" 1-3/8" 10.5
Models:  2 used on TW96
404-753841 Right-Updraft, CW 19-7/8" 4" 1/2" 1-1/2" 11
404-753842 Left CCW 19-7/8" 4" 1/2" 1-1/2" 11
Models:  Flex 20
404-757572 Dual Edge 30-3/4" 4" 1/2" 1-3/8" 17
Models:  2 used on SR15, SR15M
404-759338 Left, CW 21-1/2" 4" 1/2" 1-3/8" 13
404-759339 Right, CCW 21-1/2" 4" 1/2" 1-3/8" 13
Models:  2 used on SE5
404-761319 CCW 24-1/2" 3" 1/2" 1-3/8" 9
Models:  TW168; Replaces 00763288
404-763288 Dual Edge 17-3/16" 4" 1/2" 1-3/8" 10.5
Models:  2 used on SE6
404-772302 CCW 27-1/2" 3" 1-1/2" 1-3/8" 10
Models:  2 used on CY72, Flex 15 & 20 Center
404-58201030 Dual Edge 27-1/4" 4" 1/2" 1-3/8" 15
Models:  2 used on Flex 15 LH & RH; CY60, GR60, S128, FL10M LH & RH, FL15M LH & RH
404-65201030 Dual Edge 25" 4" 1/2" 1-3/8" 14
Models:  2 used on Saturn 8 Right
404-731340000 Updraft, CW 19-3/4" 3" .375" 1" 7
Models:  4 used on Flex 20
404-741340330 Updraft, CCW 30-1/2" 4" 1/2" 1-3/8" 17
Models:  2 used on Flex 20
404-811200000 CW 30-1/2" 4" 1/2" 1-3/8" 17
Models: 2 used on SE15-4A
404-776973 Left Wing, CW 22-1/2" 4" 1/2" 1.516"
404-775267 Right Wing, CCW 22-1/2" 4" 1/2" 1.516"
404-775233 Center, CCW 28-1/2" 4" 1/2" 1.516"
SIDEWINDER
Models:  GB48, GB144, GM66 (Tire Drive), RS160, RS213, SW66
404-15074 CCW 20-1/4" 3-1/2" 1/2" 1-1/2" 10.5
Models: 605, 660, GB60, GB602, SW72; Replaces Brown 27
404-15096 CCW 22-3/4" 3-1/2" 1/2" 1-1/2" 13
Models:  GB722, GB842, GW842, SW642, 6X6, 7X7, (Also fits Hardee 672)
404-15120 CCW 28-3/4" 3-1/2" 1/2" 1-1/2" 14
Models:  K60, SX60, 5X5
404-17065 CCW 22-3/8" 3" 3/8" 1-1/2" 6.5
Models:  Flex 15, PG210, FW215 & 216; Replaces 22334
404-20013 Dual Edge 25-7/16" 3-1/2" 1/2" 1-1/2" 12.5
TERRAIN KING
Models:  SMC, MOWAL, TK15
404-127028 Dual Edge 14" 3" 1/2" 1-1/4" 6
404-750121 Dual Edge 24-7/8" 3-1/2" 1/2" 1-1/2" 11.5
Models:  TK15, X5, Hydro 15 Right Wing
404-750787 CW 24-3/4" 3-1/2" 1/2" 1-1/2" 12
Models:  TK15, X5, Hydro 15 Left Wing & Center
404-750788 CCW 24-3/4" 3-1/2" 1/2" 1-1/2" 12
TIGER
Models:  R105, MR105, S105, S105-2, P315-2, D315-3, HD315
404-T1021R Updraft, CW 20-1/4" 4-1/2" 1/2" 1-1/2" 11.3
Models:  Deck Boom 50"
404-TB2031A CW 17-3/8" 5" 1/2" 1-1/2"
WOODS
Models:  4 used on 114
404-3915 CCW 18-5/8" 3-1/2" 3/8" 7/8" 6.4
Models:  2 used on 114
404-3917 13-7/8" 3-1/2" 3/8" 7/8" 5.75
Models:  42
404-3975 CW 19-1/2" 2-1/2" 9/32" 7/8" 3.9
Models:  2 used on 72, 84, 213, 214, 320, B315-4, M72, M84, MD172, MD184, S106, S106-1, S106-2, XT184, 6 & 7 ft.
404-6323 CCW 30-1/4" 4" 3/8" 1-1/2" 16
Models:  60-2, 60-3, 60-4, E60, M5, M5-3, M54, M60
404-6866 CCW 22" 3" 3/8" 1-1/2" 6.4
Models:  M4, 48"Billy Goat
404-7665 CCW 17-3/4" 3-1/2" 3/8" 1-1/2" 5.6
Models:  312, 320, 2090, D210R, D315, D315-2, D315-3, HD210R-2, HD210R-3, HD210R-4, HD315, HD315-4, MR105, 
P315-2, R105, S105, S105-1, S105-2
404-12892 CCW 24" 4" 3/8" 1-1/2" 12
Models:  4 used on 2120, 2162, 3180, 3240, HD315-5
404-19160 CCW 25-1/4" 4" 1/2" 1-1/2" 13.35
Models:  2 used on 2120, 2162, 3180, 3240, HD315-5
404-19161 CW 25-1/4" 4" 1/2" 1-1/2" 13.35
Models:  320, 2090, D210R, D210R-3, D315, D315-2, D315-3, HD210R-4, HD315, HD315-4, HS105, HS105-1, HS105-2,
HS105-3, P210R, P315-2, S105, S105-3
404-24771 CW 24" 4" 3/8" 1-1/2" 12
Sitemap   |   Privacy Statement   |   Copyright 2013 RangeLine Group, LLC.   All rights reserved.   Site developed by: LaJuett Web site design Rochester, NY.