TILLAGE WEAR PARTS MADE EASY!

Field Cultivator

CONVENTIONAL SWEEPS

Nichols conventional field cultivator sweeps have a long reinforced nose which provides for lasting penetration. To ensure even wear, the edges are carefully forged straight. Nichols offers the widest selection of these high-quality conventional sweeps.

43°- 47° 'CC' Style Conventional Field Cultivator Sweeps
43°- 47° 'CC' Style Stem Angle, 3/8" or 7/16" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size Material Part Number Weight (lbs)
4" 3/16" CC4A3 1.3
4" 1/4" CC4B3 1.8
6" 3/16" CC6A3 1.5
6" 1/4" CC6B3 2.1
7" 3/16" CC7A3 1.6
7" 1/4" CC7B3 2.3
8" 3/16" CC8A3 1.8
8" 1/4" CC8B3 2.4
9" 3/16" CC9A3 2
9" 1/4" CC9B3 2.5
10" 3/16" CC10A3 2.2
10" 1/4" CC10B3 2.8
11" 3/16" CC11A3 2.35
11" 1/4" CC11B3 2.9
12" 3/16" CC12A3 2.5
12" 1/4" CC12B3 3.1
Will fit these machines: Anderson, Brady (older), BushHog, CCIL 179-379, 200, Case FC Series, Cochshutt 285-485, early Deere, Ford 208, Glencoe 101, Kewanee, Krause 600, 900, Leon VibraFlex, MF 160, Morris, Oliver 245-345, 285-485, Taylor
7/16" Holes
Size Material Part Number Weight (lbs)
4" 3/16" CC4A7 1.3
4" 1/4" CC4B7 1.8
6" 3/16" CC6A7 1.5
6" 1/4" CC6B7 2.1
7" 3/16" CC7A7 1.6
7" 1/4" CC7B7 2.3
8" 3/16" CC8A7 1.8
8" 1/4" CC8B7 2.4
9" 3/16" CC9A7 2
9" 1/4" CC9B7 2.5
10" 3/16" CC10A7 2.2
10" 1/4" CC10B7 2.8
11" 3/16" CC11A7 2.35
11" 1/4" CC11B7 2.9
12" 3/16" CC12A7 2.5
12" 1/4" CC12B7 3.1
Will fit these machines: older Bourgault, Brady (newer), Brillion, Calkins, DMI, Deere 900 series, Degelman, Ezee-On, Flexi-Coil, Glencoe 4300, Hesston, Hiniker, IH Case, Kent, Krause Landsman, Landoll, MF 259, Noble, Sunflower, Versatile, Wilrich, Year Around
47° Conventional Field Cultivator Sweeps
47° Stem Angle, 3/8", 7/16", or 1/2" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size Material Part Number Weight (lbs)
4" 3/16" 47C4A3 1.3
6" 3/16" 47C6A3 1.5
10" 3/16" 47C10A3 2.2
Will fit these machines: Anderson, BushHog, CCIL 179-379, 200, Case FC Series, Cochshutt, Ford 208, Glencoe 101, Kewanee, Krause 600, 900, Leon VibraFlex, MF 160, Morris, Oliver 285-485, Taylor
7/16" Holes
Size Material Part Number Weight (lbs)
6" 3/16" 47C6A7 1.5
8" 3/16" 47C8A7 1.8
9" 1/4" 47C9B7 2.5
10" 3/16" 47C10A7 2.2
10" 1/4" 47C10B7 2.8
11" 5/16" 47C11F7 4.5
7/16" Holes - Straight Shank
Size Material Part Number Weight (lbs)
11" 5/16" 47C11SF7 4.5
Will fit these machines: older Bourgault, Brady (newer), Brillion, Calkins, DMI, Deere 900 Series, Degelman, Eeze-On, Flexi-Coil, Glencoe 4300, Hesston, Hiniker, IH Case, Kent, Krause Landsman, Landoll, MF 259, Noble, Sunflower, Versatile, Wilrich, Year Round
1/2" Holes
Size Material Part Number Weight (lbs)
11" 5/16" 47C11F2 4.5
1/2" Holes - Straight Shank
Size Material Part Number Weight (lbs)
11" 5/16" 47C11SF2 4.5
Will fit these machines: Bourgault, Flexi-Coil, new Glencoe, Morris, Wilrich
52° Conventional Field Cultivator Sweeps
52° Stem Angle, 7/16" holes for 2" centers
7/16" Holes
Size Material Part Number Weight (lbs)
6" 3/16" 52C6A7 1.5
6" 1/4" 52C6B7 2.1
7" 3/16" 52C7A7 1.6
7" 1/4" 52C7B7 2.3
8" 3/16" 52C8A7 1.8
8" 1/4" 52C8B7 2.4
9" 3/16" 52C9A7 2
9" 1/4" 52C9B7 2.5
10" 1/4" 52C10B7 2.8

Quick Change Conventional Field Cultivator Sweeps

3/16" Material
Size Part Number Weight (lbs)
4" QC4A 1.9
6" QC6A 2
7" QC7A 2.1
8" QC8A 2.2
9" QC9A 2.3
10" QC10A 2.5
11" QC11A 2.7
12" QC12A 2.9
1/4" Material
Size Part Number Weight (lbs)
4" QC4B 2.1
6" QC6B 2.5
7" QC7B 2.7
8" QC8B 2.9
9" QC9B 3
10" QC10B 3.3
11" QC11B 3.6
12" QC12B 3.8

KLIPPED WING FC

Nichols Klipped Wing field cultivator sweeps are based on the same standards as our conventional field cultivaor sweeps, but the wings are trimmed parallel to the direction the sweep is run, keeping the width consistent throughout the life of the sweep.

41° Klipped Wing Field Cultivator Sweeps
41° Stem Angle, 3/8" or 7/16" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size Material Part Number Weight (lbs)
10" 1/4" 41C10BK3 3.85
12" 1/4" 41C12BK3 4.5
Will fit these machines: Deere 1000
7/16" Holes
Size Material Part Number Weight (lbs)
10" 1/4" 41C10BK7 3.85
12" 1/4" 41C12BK7 4.5
Will fit these machines: Kewanee Row Crop Tines, Krause 'K' Tine, others with 'K' tines
47° Klipped Wing Field Cultivator Sweeps
47° Stem Angle, 7/16" or 1/2" holes for both 1-5/8" and 1-3/4" centers
7/16" Holes
Size Material Part Number Weight (lbs)
6" 1/4" 47C6BK7 3
7" 1/4" 47C7BK7 3.45
8" 1/4" 47C8BK7 3.55
9" 1/4" 47C9BK7 3.75
10" 1/4" 47C10BK7 3.85
11" 1/4" 47C11BK7 4
11" 5/16" 47C11FK7 4.5
12" 1/4" 47C12BK7 4.25
11" 5/16" 47C12FK7 5
7/16" Holes - Straight Shank
Size Material Part Number Weight (lbs)
7" 1/4" 47C7SBK7 3.45
9" 1/4" 47C9SBK7 3.75
10" 1/4" 47C10SBK7 3.85
11" 1/4" 47C11SBK7 4
11" 5/16" 47C11SFK7 4.5
12" 1/4" 47C12SBK7 4.5
Will fit these machines: Anderson, Brady (older), BushHog, CCIL 179-379, 200, Case FC series, Cochshutt 285-485, early Deere, Ford 208, Glencoe 101, Kewanee, Krause 600, 900, Leon VibraFlex, MF 160, Morris, Oliver 245-345, 285-485, Taylor
1/2" Holes
Size Material Part Number Weight (lbs)
10" 1/4" 47C10BK2 3.85
11" 1/4" 47C11BK2 4
11" 5/16" 47C11FK2 4.5
12" 1/4" 47C12BK2 4.25
12" 5/16" 47C12FK2 5
1/2" Holes - Straight Shank
Size Material Part Number Weight (lbs)
10" 1/4" 47C10SBK2 3.85
11" 1/4" 47C11SBK2 4
11" 5/16" 47C11SFK2 4.5
12" 1/4" 47C12SBK2 4.5
Will fit these machines: Bourgault, Flexi-Coil, new Glencoe, Morris, Wilrich
52° Klipped Wing Field Cultivator Sweeps
52° Stem Angle, 7/16" holes on 2" centers
7/16" Holes
Size Material Part Number Weight (lbs)
10" 1/4" 52C10BK7 3.85
Will fit these machines: AC, Case, Cochshutt, Forrest City, Minn Toba

Quick Change Klipped Wing Field Cultivator Sweeps

Knock – on Klipped Wing FC

The Nichols Klipped Wing design ensures a consistent sweep width throughout the life of the piece.

Great for heavy applications HARD-FACING CAN DOUBLE THE SERVICE LIFE!

1/4" Material
Size Part Number Weight (lbs)
6" QC6BK 2.8
7" QC7BK 3
8" QC8BK 3.4
9" QC9BK 3.6
10" QC10BK 3.8
11" QC11BK 4
12" QC12BK 4.2
5/16" Material
Size Part Number Weight (lbs)
6" QC6FK 3.4
7" QC7FK 3.6
8" QC8FK 3.9
9" QC9FK 4.3
10" QC10FK 4.5
11" QC11FK 4.7
12" QC12FK 5.2

ULTRAWING SWEEPS

The Ultrawing sweep, exclusively from Nichols, is the highest-quality, longest-lasting, and best-performing sweep on the market. With a longer nose, curved convex wings, and an optimal crown configuration, the sweep anticipates wear. The unique, patented Ultrawing design maintains the sweep’s shape over time, resulting in a significantly longer life of the piece.

The nose of the Ultrawing is elongated for better penetration, and to also ensure the tip stays sharp for as long as the sweep is used.  The Ultrawing’s optimal crown configuration is an important factor in the sweep’s design that assists in maintaining the original shape of the piece’s entire edge throughout the life of the sweep. The curved wings of the Ultrawing sweep converge at the crown at an optimum angle, elevating the crown for the most efficient wear. Acting like an old scythe, the curvature of the wings provide extra weed killing ability by preventing the weeds from sliding off the ends of the sweep, which is often the case with a standard conventional sweep, leaving partially severed roots. In addition to the wings being curved, they also have a convex surface, which turns the sweep’s leading edge downward to provide an increased angle of presentation to the soil. The convex surface also results in a stiffening effect to the wings, in addition to passing soil smoothly over the convex surface without excessively lifting the soil. For even more strength, the neck of the Ultrawing of the sweep where the stem and wings intersect. This crimped area also helps separate the soil away from the bolt heads. All of these features combined are what sets the Ultrawing sweep apart from any other sweep with excellence in performance, durability, and quality.

41° Ultrawing Field Cultivator Sweeps
41° Stem Angle, 3/8" or 7/16" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size Material Part Number Weight (lbs)
6" 1/4" 41UW6B3 2.7
7" 1/4" 41UW7B3 2.8
8" 1/4" 41UW8B3 2.85
9" 1/4" 41UW9B3 3.1
10" 1/4" 41UW10B3 3.4
Will fit these machines: Deere 1000
7/16" Holes
Size Material Part Number Weight (lbs)
6" 1/4" 41UW6B7 2.7
7" 1/4" 41UW7B7 2.8
8" 1/4" 41UW8B7 2.85
9" 1/4" 41UW9B7 3.1
10" 1/4" 41UW10B7 3.4
Will fit these machines: Kewanee Row Crop Units, Krause 'K' Tine, others with 'K' tines
43° Ultrawing Field Cultivator Sweeps
43° Stem Angle, 3/8" or 7/16" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size Material Part Number Weight (lbs)
7" 1/4" 43UW7B3 2.8
9" 1/4" 43UW9B3 3.1
10" 1/4" 43UW10B3 3.4
11" 1/4" 43UW11B3 3.5
Will fit these machines: Brady (older), early Deere, Oliver 245-345
7/16" Holes
Size Material Part Number Weight (lbs)
7" 1/4" 43UW7B7 2.8
9" 1/4" 43UW9B7 3.1
10" 1/4" 43UW10B7 3.4
11" 1/4" 43UW11B7 3.5
Will fit these machines: Landoll, Versatile, Year Round
47° Ultrawing Field Cultivator Sweeps
47° Stem Angle, 3/8", 7/16", or 1/2" holes for both 1-5/8" and 1-3/4" centers
3/8" Holes
Size Material Part Number Weight (lbs)
6" 1/4" 47UW6B3 2.7
7" 1/4" 47UW7B3 2.8
8" 1/4" 47UW8B3 2.85
9" 1/4" 47UW9B3 3.1
10" 1/4" 47UW10B3 3.4
11" 1/4" 47UW11B3 3.5
12" 1/4" 47UW12B3 3.7
Will fit these machines: Anderson, BushHog, CCIL 179-379, 200, Case FC Series, Cochshutt, Ford 208, Glencoe 101, Kewanee, Krause 600, 900, Leon VibraFlex, MF 160, Morris, Oliver 285-485, Taylor
7/16" Holes
Size Material Part Number Weight (lbs)
6" 1/4" 47UW6B7 2.7
7" 1/4" 47UW7B7 2.8
8" 1/4" 47UW8B7 2.85
9" 1/4" 47UW9B7 3.1
9" 5/16" 47UW9F7 4
10" 1/4" 47UW10B7 3.4
10" 5/16" 47UW10F7 4.25
11" 1/4" 47UW11B7 3.5
11" 5/16" 47UW11F7 4.5
12" 1/4" 47UW12B7 3.7
12" 5/16" 47UW12F7 4.75
Will fit these machines: older Bourgault, Brady (newer), Brillion, Calkins, DMI, Deere 900 Series, Degelman, Eeze-On, Flexi-Coil, Glencoe 4300, Hesston, Hiniker, IH Case, Kent, Krause Landsman, Landoll, MF 259, Noble, Sunflower, Versatile, Wilrich, Year Around
1/2" Holes
Size Material Part Number Weight (lbs)
9" 5/16" 47UW9F2 4
10" 1/4" 47UW10B2 3.4
10" 5/16" 47UW10F2 4.25
11" 1/4" 47UW11B2 3.5
11" 5/16" 47UW11F2 4.5
12" 1/4" 47UW12B2 3.7
12" 5/16" 4712F2 4.75
Will fit these machines: Bourgault, Flexi-Coil, new Glencoe, Morris, Wilrich
52° Ultrawing Field Cultivator Sweeps
52° Stem Angle, 7/16" holes for 2" centers
7/16" Holes
Size Material Part Number Weight (lbs)
6" 1/4" 52UW6B7 2.7
7" 1/4" 52UW7B7 2.8
8" 1/4" 52UW8B7 2.85
9" 1/4" 52UW9B7 3.1
10" 1/4" 52UW10B7 3.4
Will fit these machines: AC, Case, Cochshutt, Forrest City, Minn Toba

Quick Change Ultrawing Field Cultivator Sweeps

 
1/4" Material
Size Part Number Weight (lbs)
6" UWQC6B 2.7
7" UWQC7B 2.9
8" UWQC8B 3.2
9" UWQC9B 3.4
10" UWQC10B 3.5
11" UWQC11B 3.7
12" UWQC12B 3.8
5/16" Material
Size Part Number Weight (lbs)
6" UWQC6F 3.6
7" UWQC7F 3.8
8" UWQC8F 4
9" UWQC9F 4.3
10" UWQC10F 4.5
11" UWQC11F 4.5
12" UWQC12F 5

FC DOUBLE POINTS

Forged from hardened steel, Nichols field cultivator chisels are built to last. They are available in three material thicknesses as well as machine-specific applications.

 
3/8" Holes
Size Material Hole Spacing Part Number Weight (lbs)
1-3/4" x 11" 1/4" 1-3/4" CC134-3 1
2" x 11" 1/4" slotted CS4 0.75
2" x 11" 3/8" 1-3/4" CC33 2
2" x 11" 3/8" 2" AC72 2
7/16" Holes
Size Material Hole Spacing Part Number Weight (lbs)
1-3/4" x 11" 1/4" 1-3/4" CC134-7 1
2" x 11" 1/4" 2" CS2 0.75
2" x 11" 1/4" slotted CS3 0.75
2" x 11" 3/8" 1-3/4" CC37 2
Field Cultivator Chisels for Bourgault
1/2" holes, diamond style ends with flat back
Size Material Hole Spacing Part Number Weight (lbs)
2" x 14" 5/8" 1-3/4" CC2B2 2.5
Field Cultivator Chisels for CrustBuster
3/8" holes, 2" hole spacing
Size Material Ends Style Part Number Weight (lbs)
2" x 14" 1/4" Flared CB1 1.5
2" x 14" 3/8" Swedged CB2 2
Field Cultivator Chisels for Lilliston
7/16" holes, 2" hole spacing
Size Material Ends Style Part Number Weight (lbs)
1-1/2" x 13" 3/4" Forged Points LIL13 3.8
Sitemap   |   Privacy Statement   |   Copyright 2013 RangeLine Group, LLC.   All rights reserved.   Site developed by: LaJuett Web site design Rochester, NY.