TILLAGE WEAR PARTS MADE EASY!

Ripper Points

winged Ripper Points

Winged Ripper features a forged and hardened alloy bar with an inset one-piece wing and a chrome cap. The heavy chrome cap extends virtually the entire length for even soil flow and added wear. 

Nichols deep tillage shovels are essentially winged rippers, constructed in as few pieces as possible to assure a solid piece.

RPDMI158FCP

 

finned Ripper Points

With a distinct forged steel fin, the Nichols finned ripper has been carefully designed for optimum performance and unprecedented durability. Starting with a hardened chrome steel bar, a heavy 3/16″ boot and chromium carbide wear point are welded into place. Complemented by welding the fin, Nichols finned rippers are made specifically to fit  KMC shanks.


 Hard-faced or capped, Nichols raised-center shovels have a reputation for breaking through most any type of soil with ease.

Ripper points with welded chrome caps can last twice as long as hard surfaced points!



 

Available for nearly every application, Nichols ripper points are offered in many different combinations to fit specific machines.

Ripper Points to fit Big Ox
Size Style Part Number Weight (lbs)  
1-3/4" x 6-1/2" standard OXPLAIN 4.5  
1-3/4" x 6-1/2" hardfaced OXHF 4.5  
2-1/4" x 7" capped OXCAP 5.5  
Repair Point standard OXREPAIR 7.4
Ripper Points to fit Brent
Size Style Part Number Weight (lbs)  
1" x 2-1/2" standard RPBR25 8.3  
1" x 2-1/2" hardfaced RPBR25HF 8.4  
1" x 2-1/2" capped RPBR25CP 9.2  
RPBRL20RPBRL20     RPBRLW25HFRPBRLW25HF  
Ripper Points to fit Brillion
Size Style Part Number Weight (lbs)  
1" x 2" x 12" standard RPBRL20 7.6  
1" x 2" x 12" capped RPBRL20CP 7.8  
1" x 2-1/2" x 17", 5/8" hole on 2-1/4" Center standard, bolt on RPBRL25B 9.8  
1" x 2 x 12" hardfaced* RPBRLW25HF 10.1  
1-1/2 x 1-7/8" x 11" ripple, finned RPBRLX19GHF 14  
1-5/8" x 2" x 11", 7" Wing, capped* RPBRLW237CP 18  
* new shank with guard notched
Ripper Points to fit Bush Hog
Size Style Part Number Weight (lbs)  
1" x 2" x 12" standard RPBH20 6.9  
1" x 2" x 12" capped RPBH20CP 7.4  
RPD25CPRPD25CP   RPD20CP
Ripper Points to fit Deere
Size Style Part Number Weight (lbs)  
2" x 12" standard RPD20 6.9  
2" x 12" capped RPD20CP 7.4  
2" x 12" standard* RPD20B 5.7  
2" x 12" capped* RPD20BCP 6.5  
2-1/2" x 12" standard RPD25 8.3  
2-1/2" x 12" hardfaced RPD25HF 8.6  
2-1/2" x 12" capped RPD25CP 9.4  
2-1/2" x 12" standard* RPD25B 7.1  
2-1/2" x 12" capped* RPD25BCP 8.1  
* bolt-on
 
RPDL25CP
Ripper Points to fit New Style Deere with shank guards and Krause "Dominator"
Size Style Part Number Weight (lbs)  
1" x 2-1/2" x 14", for 1-1/4" shank capped RPDL25CP 17  
2" x 1-5/8" x 14", for 1-1/4" shank, 7" Wing capped RPDL247CP 26.9  
2" x 1-5/8" x 14", for 1-1/4" shank, 10" Wing capped RPDL2410CP 29.3
RPDMI158FCPRPDMI58FCP   RPDMI3CPWRPDMI13CPW     RPDM25CP   RPDM237CPRPDM237CP   SBDM75X24SBDM75X24
Ripper Points to fit DMI CNH
Size Style Part Number Weight (lbs)  
7" Wing, bolt on chisel capped RPDMI3CPW 9.5  
 2" No-Till Ripper standard RPDMI52FCP    
8" No-Till Ripper standard PRDMI58FCP 22.5
1-1/4" Shank capped RPDM20CP 10.1
10" Wing, 1-1/4" shank capped RPDM2310CP 19.7
5" Wing, 1-1/4" shank capped RPDM235CP 16.4
7" Wing, 1-1/4" shank capped RPDM237CP 17.4
10" Wing, 1-1/2" shank capped RPDM2410CP 29.3
10" Wing, 1-1/2" shank hard-faced RPDM2410HF 29.8
7" Wing, 1-1/2" shank, 2" x 1-5/8" x 14" capped RPDM247CP 26.9
1-1/2" shank capped RPDM25CP 17
1-1/4" shank, ripple standard RPDM27 12
1-1/4" shank, ripple finned, hardfaced RPDM27GHF 15.1
1-1/4" shank, ripple hardfaced RPDM27HF 13.2
Low Disturbance Shank Bar standard SBDM75X24 29.5
 Shin for Minimum Residue Disturbance Shank standard NT09581760 9.4
Coverboard
Size Style Part Number Weight (lbs)  
4" Covering Board standard CE4 4.2  
6" Covering Board standard CE6 5.7  
8" Covering Board standard CE8 7
Use 7/16" x 1-1/4" bolts
Ripper Points to fit Forrest City
Size Style Part Number Weight (lbs)  
1" x 2" standard RPFC20 6.4  
1" x 2" capped RPFC20CP 6.4  
RPLAW27HFRPLAW27HF
Ripper Points to fit Glencoe
Size Style Part Number Weight (lbs)  
2-1/2", for 1-1/4" shank ripple RPDM27 6  
2-1/2" for 1" shank, notched for shank guard ripple RPLAW27HF 7  
Ripper Points to fit Great Plains
Size Style Part Number Weight (lbs)  
7" capped RPGP237CP 17.4  
2" capped RPGP20CP 10  
Ripper Points to fit Hamby
Size Style Part Number Weight (lbs)  
5/8" x 2" x 8" standard RPHB20 2.5  
5/8" x 2" x 8" capped RPHB20CP 3.5  
RPKEX114FCP 
Ripper Points to fit Halifax and Kelley
Size Style Part Number Weight (lbs)  
1-3/8" x 11", Narrow Boot standard RPKEX114 6.3  
1-3/8" x 11", Narrow Boot capped RPKEX114CP 7  
1-3/8" x 11", Narrow Boot double capped RPKEX114CPCP 7.5  
1-3/8" x 11", Narrow Boot capped, finned RPKEX114FCP 9.3  
8" Wing, 1-1/2" x 2", Narrow Boot capped, finned RPKEX128FCP 20.1
2" x 12", Narrow Boot capped RPKEX20CP 7.2
2" x 12", Narrow Boot double capped RPKEX20CPCP 8
2" x 12", Narrow Boot capped, finned RPKEX20FCP 9.3
RPKE20FCP 
Ripper Points to fit Kelley
Size Style Part Number Weight (lbs)  
1-1/2" x 1-3/4" x 11", Wide Boot standard RPKE19 7.8  
1-1/2" x 1-3/4" x 11", Wide Boot finned RPKE19G 11  
1" x 2" x 12", Wide Boot, Full Length cast capped,finned RPKE20CFCP    
1" x 2" x 12", Wide Boot capped RPKE20CP 6.9  
1" x 2" x 12", Wide Boot double capped RPKE20CPCP 8  
1" x 2" x 12", Wide Boot delta capped RPKE20DCP 8.5  
1" x 2" x 12", Wide Boot  capped, finned RPKE20FCP 9.2  
1" x 2-1/2" x 12", Wide Boot standard* RPKE25B 7.5  
1-1/2" x 2", Wide Boot capped, finned RPKE128FCP 19  
1-3/4" x 1-3/4" x 11", Narrow Boot standard RPKEX19 8
1-1/2" x 1-3/4" x 11", Narrow Boot finned RPKEX19G 11.2
2" x 12", Narrow Boot cast capped, finned RPKEX20CFCP 12.3
8" Wing, Narrow Boot, 1-1/2" x 2" dome capped RPKEX20DCP 8.5
Fin standard RPOFIN304 1.5
Shin Guard, to fit KMC and Unverferth standard BPW040DL 4.2
Chrome Shin Guard to fit KMC and Unverferth standard BPW040CR 4.7
* bolt-on
Ripper Points to fit International Harvester
Size Style Part Number Weight (lbs)  
2-1/2" x 12" capped RPIH25CP 9.4  
RPLAW27HFRPLAW27HF
Ripper Points to fit Landoll
Size Style Part Number Weight (lbs)  
1" x 2" x 12" standard RPLA20 6.9  
1" x 2" x 12" capped RPLA20CP 7.7  
1" x 2" x 12", 1/2" holes on 3" centers standard* RPLA20B 6  
1" x 2" x 12", 1/2" holes on 3" centers capped* RPLA20BCP 8  
7" Wing, Shank Notch capped RPLAW237CP 17.5  
 2-1/2" Ripple, Notch standard RPLAW27 11.5  
2-1/2" Ripple, Notch hardfaced RPLAW27HF 11.5
 2-1/2" Ripple, Notch finned, hardfaced RPLAW27GHF 16.7  
* bolt on
RM12RM12
Ripper Points to fit M & W Gear
Size Style Part Number Weight (lbs)  
requires pin to mount standard RM12 6  
requires pin to mount hardfaced RM12HF 6  
knurled pin, heat treated for RM12 standard 77MW PIN
Oversized knurled pin, heat treated for RM12 standard 88MW PIN
RPMW25KHFRPMW25KHF
Ripper Points to fit M&W New Series
Size Style Part Number Weight (lbs)  
7" chrome capped RPMW247CP 26.9  
2-1/2" hardfaced RPMW25KHF 10.4  
Ripper Points to fit Para till
Size Style Part Number Weight (lbs)  
1-1/2" Boot Width chrome capped RPPT25CP 6.35  
RPRW20CPRPRW20CP      
Ripper Points to fit Rawson and Unverferth
Size Style Part Number Weight (lbs)  
1" x 2" x 10-1/2", Notched standard RPRW20 7.5  
1" x 2" x 10-1/2", Notched hardfaced RPRW20HF 8  
1" x 2" x 10-1/2", Notched capped RPRW20CP 6.5  
1" x 2" x 10-1/2", Notched delta capped RPRW20DCP 10
 Zone Builder Shin, fits Rawson standard NT41207 10.3
Shin Guard, fits Unverferth & KMC standard BPW040DL 4.2
RPSU27GHFRPSU27GHF   RPSU27HFRPSU27HF        
Ripper Points to fit Sunflower, M & W
Size Style Part Number Weight (lbs)  
5" Wing, 1-5/8" x 2" x 11" standard RPSU235CP 16.2  
7" Wing, 1-5/8" x 2" x 11" capped RPSU237CP 16.3  
1" x 2-1/2" x 12" standard RPSU25 8.3  
1" x 2-1/2" x 12" capped RPSU25CP 9  
1" x 2-1/2" x 12" hardfaced RPSU25HF 9.4
1-1/2" x 2-3/8" x 13" Ripple standard RPSU27 11.2
1-1/2" x 2-3/8" x 13" Ripple hardfaced, finned RPSU27GHF 17.2
1-1/2" x 2-3/8" x 13" Ripple hardfaced RPSU27HF 11.8
Ripper Points to fit W & A
Size Style Part Number Weight (lbs)  
1" x 2" x 12-1/4" standard RPWA20N 7  
1" x 2" x 12-1/4" capped RPWA20NCP 7.75  
Ripper Points to fit Wilrich 957
Style Style Part Number Weight (lbs)
2-1/2" x 13-1/2" double capped RPWR25CP 17
2" x 14", 7" Wing capped RPWRW247CP 29.3
2" x 14", 10" Wing capped RPWRW2410CP 29.3
2-1/2" x 13-1/2" double capped RPWRW25CP 17
Sitemap   |   Privacy Statement   |   Copyright 2013 RangeLine Group, LLC.   All rights reserved.   Site developed by: LaJuett Web site design Rochester, NY.