TILLAGE WEAR PARTS MADE EASY!

Row Crop Cultivator / Other Cultivator Sweeps

ROW CROP SWEEPS

Nichols conventional row crop cultivator sweeps have a low crown to move less soil making them ideal for low till as well as conventional till practices. The three-hole pattern allows these sweeps to fit most applications.

1-3/4" wide stem with two 7/16" holes on a 2" center and a single 5/8" hole in between.
3/16" Material
Size Part Number Weight (lbs)
4" 31604 1
6" 31606 1.2
8" 31608 1.7
10" 31610 2
12" 31612 2.5
14" 31614 3.2
1/4" Material
Size Part Number Weight (lbs)
4" 1404 1.5
6" 1406 1.8
8" 1408 3.3
10" 1410 3.8
12" 1412 4.6
14" 1414 5.1
16" 1416 5.3
18" 1418 6
20" 1420 7
22" 1422 7.5
24" 1424 8
26" 1426 9.5
28" 1428 10.2
30" 1430 10.3
32" 1432 11.1
Hardfaced sweeps are available - Call for details.

REVERSIBLE BLADES

Nichols replacement reversible blades are made from 5/16″ heat-treated steel, complete with 3/8″ counter-sunk holes. Left and right pieces are available either plain or hard-faced.

Reversible Blades for Deere
Size Style Part Number Weight (lbs)
12" standard DE51612 4.35
14" standard DE51614 4.35
16" standard DE51616 4.8
22" standard DE51622 4.8
24" standard DE51624 5.35
26" standard DE51626 5.35
Reversible Blades for Hiniker, Kinze, and Krause
Size Style Part Number Weight (lbs)
17" standard HI51617 4.35
17" hardfaced HI51617HF 4.35
19" standard HI51619 4.8
19" hardfaced HI51619HF 4.8
21" standard HI51621 5.35
21" hardfaced HI51621HF 5.35
25" standard HI51625 6.44
25" hardfaced HI51625HF 6.44
27" standard HI51627 6.9
27" hardfaced HI51627HF 6.9
Reversible Blades for Orthman
Size Style Part Number Weight (lbs)
26" right hardfaced OR264RHHF 4.2
26" left hardfaced OR265LHHF 4.2

MIDDLE WORKER POINTS

Cap Style Machine Application Part Number
Flat Kinze 41BMPK
Eaglebeak Kinze 41WCPK
Flat Hiniker, Buffalo, Krause, and Wetherell 41BMPH
Eaglebeak Hiniker 5000 41WCP5
Eaglebeak Hiniker 6000 41WCP6
Flat Sukup 41BMPS

DANISH/S-TINE

Nichols has a broad selection of Danish sweeps for almost any shallow cultivation situation. Constructed from heat-treated steel for a long life, each piece has a peg below the bolt hole to divert soil away from the bolt.

3/16" Material (5mm)
Size Hole Size Style Part Number Weight (lbs)
2-3/4" 3/8" V Pattern G2A 0.7
4" 3/8" V Pattern G4A 0.75
4" 3/8" Duckfoot MG4A 0.8
7" 3/8" Winged G7A 1.05
9" 3/8" Winged G9A 1.35
1/4" Material (6mm)
Size Hole Size Style Part Number Weight (lbs)
1/4" x 8" 3/8" Reversible G1B 0.75
2-3/4" 3/8" V Pattern G2B 0.75
2-3/4" 3/8" V Pattern Hardfaced G2BHF 0.75
2-3/4" 3/8" Duckfoot MG2B 0.75
2-3/4" 7/16" Duckfoot G2B7 0.75
4" 3/8" V Pattern G4B 0.9
4" 3/8" V Pattern Hardfaced G4BHF 0.9
4" 3/8" Duckfoot MG4B 1.1
4" 3/8" Duckfoot Hardfaced MG4BHF 0.9
4" 7/16" V Pattern G4B7 0.9
4" 7/16" Duckfoot MG4B7 1.1
7" 3/8" Winged G7B 1.1
7" 3/8" Winged Hardfaced G7BHF 1.1
7" 7/16" Winged G7B7 1.3
9" 3/8" Winged G9B 1.6
9" 3/8" Winged Hardfaced G9BHF 1.6
9" 7/16" Winged G9B7 1.6
10" 3/8" Solid Winged G10B 1.65
10" 7/16" Solid Winged G10B7 1.65
         
Cast Chrome Alloy
Size Hole Size Style Part Number Weight (lbs)
1" x 8" 3/8" Reversible CG1B 1.2
2-3/4" 3/8" V Pattern CG2B 1.3
4" 3/8" V Pattern CG4B 1.6
7" 3/8" V Pattern CG7B 2.4

 

BEDDING/JOYCE SWEEPS

Nichols cotton sweeps – also known as ‘Joyce Pattern’ sweeps – are made with a high wing pitch so that the sweep throws dirt to the plant row. An effective combination of wide wings and a narrow stem result in the perfect amount of soil disturbance desired to make crops thrive.

1-3/4" wide stem with two 7/16" holes on a 2-1/4" center and a single 5/8" hole in between
Size Part Number Weight (lbs)
6" 21406 2.6
8" 21408 2.8
10" 21410 3.7
12" 21412 4.9
14" 21414 5.4
16" 21416 6.5
18" 21418 7.6
20" 21420 8.3
22" 21422 8.7
24" 21424 10
26" 21426 11.1

ROLLING CULTIVATOR/LILLISTON

Replacement Spiders      
Part# Size Description Weight (Lb.)
332-14RH 14-1/2" PLAIN RH 9
332-14LH 14-1/2" PLAIN LH 9
332-H14RH 14-1/2" Extended Wear RH 9
332-H14LH 14-1/2" Extended Wear LH 9
332-16RH 16" PLAIN RH 10
332-16LH 16" PLAIN LH 10
332-H16RH 16" Extended Wear RH 10
332-H16LH 16" Extended Wear LH 10
Spider Gang Assemblies
Part # Size Description Finish
332-H144RH 14-1/2" 4 SPIDER GANG RH Extended Wear
332-H144LH 14-1/2" 4 SPIDER GANG LH Extended Wear
332-145RH 14-1/2" 5 SPIDER GANG RH Plain
332-145LH 14-1/2" 5 SPIDER GANG LH Plain
332-H145RH 14-1/2" 5 SPIDER GANG RH Extended Wear
332-H145LH 14-1/2" 5 SPIDER GANG LH Extended Wear
332-164RH 16" 4 SPIDER GANG RH Plain
332-164LH 16" 4 SPIDER GANG LH Plain
332-H164RH 16" 4 SPIDER GANG RH Extended Wear
332-H164LH 16" 4 SPIDER GANG LH Extended Wear
332-165RH 16" 5 SPIDER GANG RH Plain
332-165LH 16" 5 SPIDER GANG LH Plain
332-H165RH 16" 5 SPIDER GANG RH Extended Wear
332-H165LH 16" 5 SPIDER GANG LH Extended Wear

ALABAMA SWEEPS

Flat Back Alabama Nichols sweeps features a high crown, seven hole  pattern and are intended for use with wing extenders or “hungry boards”. Each wing has two 3/8″ holes for wing extenders.

Flat Back Alabama
1/4" Material
Size Part Number Weight (lbs)
16" AL16B7SB 9.5
18" AL18B7SB 10.5
20" AL20B7SB 13.5
22" AL22B7SB 15.5
24" AL24B7SB 15.75
Two center holes (3/4" top and 1/2" bottom) on 2-1/4" center with 5/8" peg located one inch below the lower (1/2") center hole, wings have two 3/8" holes for extenders
5/16" Material
Size Part Number Weight (lbs)
16" AL16F7SB 11
18" AL18F7SB 12.9
20" AL20F7SB 16.5
22" AL22F7SB 18.5
24" AL24F7SB 19.5
Hardfaced sweeps are available
Low Crown Alabama

Nichols low crown Alabama sweeps are used for breaking middles and ridges with their solid, single piece design. Available in two or three hole  pattern.

1/4" Material
Size Style Part Number Weight (lbs)
10" 2-Hole AL10B2LO 6
10" 3-Hole AL10B3LO 6
12" 2-Hole AL12B2LO 6.5
12" 3-Hole AL12B3LO 6.5
14" 2-Hole AL14B2LO 6.8
14" 3-Hole AL14B3LO 6.8
16" 2-Hole AL16B2LO 7.9
16" 3-Hole AL16B3LO 7.9
18" 2-Hole AL18B2LO 8.1
18" 3-Hole AL18B3LO 8.1
20" 2-Hole AL20B2LO 13.5
20" 3-Hole AL20B3LO 13.5
22" 2-Hole AL22B2LO 15.5
22" 3-Hole AL22B3LO 15.5
24" 2-Hole AL24B2LO 15.75
24" 3-Hole AL24B3LO 15.75
Two 7/16" holes on a 2-1/4" center and an optional third 5/8" square hole in between
Hardfaced sweeps are available
High Crown Alabama: Two 7/16" holes on a 2-1/4" center and an optional third 5/8" square hole in between

Nichols high crown Alabama sweeps are based on the same design as the low crown only with an elevated ridge for increased soil disturbance. Available in two or three hole pattern.

1/4" Material
Size Style Part Number Weight (lbs)
10" 2-Hole AL10B2LO 6
10" 3-Hole AL10B3LO 6
12" 2-Hole AL12B2LO 6.5
12" 3-Hole AL12B3LO 6.5
14" 2-Hole AL14B2LO 6.8
14" 3-Hole AL14B3LO 6.8
16" 2-Hole AL16B2LO 7.9
16" 3-Hole AL16B3LO 7.9
18" 2-Hole AL18B2LO 8.1
18" 3-Hole AL18B3LO 8.1
20" 2-Hole AL20B2LO 13.5
20" 3-Hole AL20B3LO 13.5
22" 2-Hole AL22B2LO 15.5
22" 3-Hole AL22B3LO 15.5
24" 2-Hole AL24B2LO 15.75
24" 3-Hole AL24B3LO 15.75
Hardfaced sweeps are available

SOIL SLITTER SWEEPS

The Nichols Soil Slitter is used with the Nichols Quick Change system for direct seeding into stubble. Available in several widths, these pieces are built to retain their original width throughout the life of the sweep. With a narrow stem width of less than one inch, the Soil Slitter is a true narrow-profile opener.

1/4" Material
Size Part Number Weight
2" QCSS2B 2.05
3" QCSS3B 2.25
4" QCSS4B 2.45
6" QCSS6B 2.65
7" QCSS7B 2.85
8" QCSS8B 3.15
9" QCSS9B 3.35
10" QCSS10B 3.55
11" QCSS11B 3.75
12" QCSS12B 4
14" QCSS14B 4.35
5/16" Material
Size Part Number Weight
2" QCSS2F 2.75
3" QCSS3F 2.95
4" QCSS4F 3.15

BEAVER TAIL SHOVELS

Also known as “corn shovels”, Nichols beaver tail shovels are designed for deep tillage applications.

Two 1/2" holes for 2-1/4" centers
Size Part Number Weight (lbs)
4" BT4 2.4
5" BT5 2.6
6" BT6 2.8

BEET SWEEPS

Nichols beet sweeps have curved wings and take place of both Smith fin and Danish sweeps. Since this sweep runs shallow, dirt does not flow near the bolt head. For best results, use Nichols beet sweeps with Nichols flexible S tines.

Size Part Number Weight (lbs)
6" G6A 1.2
8" G8A 1.3
10" G10A 1.5
12" G12A 1.6
14" G14A 1.8
16" G16A 1.9

CREASER POINTS

Nichols creaser points are made from 5/16″ material and are available hard-faced or plain in several different styles.

Style Part Number Weight (lbs)
round hole Number 1 2.6
hardfaced round hole Number 1HF 2.6
square hole Number 2 2.6
hardfaced square hole Number 2HF 2.6
round nose Number 3 2.6

FURROWERS

Of the three styles of heavy-duty furrowers Nichols offers, the ever-popular ‘Nichols Original’ is a sure bet. All Nichols furrowers feature a long nose and trimmed wings to move soil in preferred patterns. Tippers that may be needed for certain applications are also available.

3/4" Square Hole
Top Width Bottom Width Part Number Weight (lbs)
9" 7" 8SQ 5.5
11" 8" 11NSQ 7.3
11" 9" 11WSQ 7.3
15" 12" 12SQ 12.5
15" 13" 14SQ 13
17" 15" 15SQ 15
7/16" Square Hole and Slot for 1-3/4" to 2-1/4" Centers
Top Width Bottom Width Part Number Weight (lbs)
9" 7" 8SLOT 5.5
11" 8" 11NSLOT 7.3
11" 9" 11WSLOT 7.3
15" 12" 12SLOT 12.5
15" 13" 14SLOT 13
17" 15" 15SLOT 15
Two 7/16" Square Holes for 2" Centers with a 5/8" Square Hole between
Top Width Bottom Width Part Number Weight (lbs)
15" 12" 12C 12.5
15" 13" 14C 13
17" 15" 15C 15
Two 1/2" Square Holes for 2" Centers with a 5/8" Square Hole between
Top Width Bottom Width Part Number Weight (lbs)
11" 9" 11WT 7.3
15" 12" 12T 12.5
15" 13" 14T 13
17" 15" 15T 15
346 Furrowers: 1/4" Material, Replaces Lister Share and Mouldboards
Description Part Number Weight (lbs)
17" top/15" bottom width furrower 346 20
tipper for 346 furrower 346 Tipper 5
weld-on replacement nose 346 Repair Point 5

BUFFALO SWEEPS

Nichols Buffalo sweeps are modeled after our conventional design with even more emphasis on minimum soil disturbance. The sweeps are designed to fit the Buffalo machine.

1/4" material, two 1/2" or 7/16" holes on a 2" center
1/2" Holes
Size Part Number Weight (lbs)
12" 1412B 4.6
14" 1414B 5.1
16" 1416B 5.3
18" 1418B 6
20" 1420B 7
22" 1422B 7.5
24" 1424B 8
7/16" Holes
Size Part Number Weight (lbs)
12" 1412B-7 4.6
14" 1414B-7 5.1
16" 1416B-7 5.3
18" 1418B-7 6
20" 1420B-7 7
22" 1422B-7 7.5
24" 1424B-7 8
Will fit these machines: Alloway, Buffalo, Case, Deere, Hiniker, Landoll, Lorenz, Noble, Orthman, Sukup, Wilrich

WIDE SHANK ROW CROP SWEEPS

Nichols wide shank row crop cultivator sweeps feature a 2″ wide shank with slotted holes to accomocate two different hole centers. Wide tapered wings shed trash with ease and offer minimal soil disturbance.

1/4" material, 2" wide stem with two 1/2" slotted holes for 2" to 2-1/4" centers and a single 5/8" hole in between
Size Part Number Weight (lbs)
20" 1420W 9
22" 1422W 9.5
24" 1424W 10
26" 1426W 11
28" 1428W 11.7
30" 1430W 11.9
32" 1432W 13
Sitemap   |   Privacy Statement   |   Copyright 2013 RangeLine Group, LLC.   All rights reserved.   Site developed by: LaJuett Web site design Rochester, NY.